How To Fix Virtual Memory Too Low Error

This is a very common error message and before showing how to resolve the low virtual memory error we should maybe explain what it is an what causes it.

What is virtual memory?

You computer has RAM which distributes data from the hard drive to the processor and the other way around. When the RAM memory is running out of space it calls for backup in the form of virtual memory. Virtual memory is just that “Virtual” as it taps into space on the hard drive to give your RAM a bit of backup.

If the amount of Virtual memory available to the operating system is too low you will start to get the virtual memory too low messages. The most common reason for getting this message is a recent memory upgrade or setting change. Luckily there is a way to ensure you have enough virtual memory by simply changing a few settings in the virtual memory settings.

How to change the amount of virtual memory in Windows 7 and Vista

Go to your start button at the bottom left of your screen and then go to computer and right click on it.

You will now see the system information screen. To access the virtual memory settings page click the advanced settings text link on the left hand side of the page.

You will now have a new window pop up with a number of tabs along the top. It should default to the advanced tab but if not select the advanced tab and then under performance select settings to get to the virtual memory settings. Another new windows will open, select the advanced tab again. Finally click on the change button under Virtual memory and this will be the page we resolve the problem.

You will now be in the virtual memory settings screen and your virtual memory settings may look different from the screenshot below.

For most people setting the virtual memory to be automatically managed by the operating system should be more than adequate for most people.

If you can’t or don’t want to use the automatic option you can set it manually.

Custom Size – Sets the minimum and maximum Paging file. If you are going to set manually the usual recommended figure for maximum is 1.5 times your amount of RAM. For example if you have 4GB of RAM then the recommended maximum is 6GB of virtual memory but if you are still getting the error it may be worth playing about with the maximum.

System Managed - Means that the memory is managed by the system but again if you are getting virtual memory too low warnings you may be best playing around with custom size.

No paging File – Not recommended. This means you will have no virtual memory backup should you run low on memory.

Once you have set simply OK through the open screens. You may be prompted to restart your computer.

Hopefully that should resolve your virtual memory too low warning messages.

Courtesy : http://bnjho.blogspot.in

Top 5 Useful Windows 7 Tips and Tricks

While you will find many articles with Windows 7 tips very few of them are useful to the average users. We look at the top 5 useful Windows 7 tips that can help make life a little easier.

1. Lock your Computer

When you are away from your desk you may want to secure your computer from unauthorised access by locking the screen (Taking it back to the login screen). It is very easy to do this by pressing a  combination of the windows key (the one between alt and ctrl on most keyboards) and the L key together. This will lock your screen and require a password.

Note: To do this your account must be password protected.

2. Rename a batch of files

This technique allows you to rename a collection of files and folders in one go. For example if you have a lot of holiday snaps you may wish to rename them all “Holiday” followed by a unique number. Using this technique will rename the files Holiday(1) Holiday(2) Holiday(3) etc.

Select all the files you wish to rename either by dragging the mouse or if it is all the files using edit/select all. Press F2 and then type the name into the first file and press enter. All your files will be renamed.

3. Improve readability of text with ClearType

ClearType is a piece of software included with windows 7 that allows you to improve the quality of the text on 

the screen to make it easier to read. The program shows you a number of text examples and asks you to choose which is easiest to read and adjusts your display based on the answers.

To start Cleartype click the start/windows button in the bottom left corner of your screen. In the search box at the bottom type cttune.exe. This will launch the program

4. Access recent folders

On the taskbar at the bottom of your screen is a folder icon. Clicking the folder opens the document section of the libraries folder but if you right click you will get a list of recently accessed folders. You can also pin you favourites to this menu

4. Pin folders to the task bar via windows explorer

Pinning a folder to the windows explorer folder on the task bar is very easy to do. For example you may want to pin a frequently accessed folder you use for work. Find the folder you want to pin and click your left mouse button on it and hold. Drag the folder to the task bar until you see a message say “pin to windows explorer” then let go of the mouse button. If you now go back and use tip 4 you will see your folder at the top.

5. Wiggle away those windows

This is a useful little trick for those of you that often have multiple windows open. There are times you want to minimize everything but the window you are working on. If you use the show desktop button it minimises all of the windows. Worry not there is a way to keep that window open.

Left click and hold in the top bar of the window you want to stay open (the bit where the name of the program is along with the maximise and close buttons) While holding wiggle the mouse from side to side quickly and you will see all the windows minimise. To bring them all back just repeat.

Courtesy : http://bnjho.blogspot.in

RESTART WINDOWS WITHOUT RESTARTING YOUR COMPUTER

Mostly Computer takes lots of time for restart. Sometimes we need to restart our computer, that time it becomes necessity like after installing some software but when we have limited time and we are busy then it is very annoying to wait for it to restart.

HOW TO ADD RUN COMMAND TO THE START MENU IN WINDOWS 7

To add the Run command to the Start menu

1. Open Taskbar and Start Menu Properties by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, and then clicking Taskbar and Start Menu.
2. Click the Start Menu tab, and then click Customize.
3. In the list of Start menu options, select the Run command check box, and then click OK. The Run command will be displayed on the right side of the Start menu.

How To Install Windows Using An USB Flash Drive

Yes, Its possible! You can use your USB that you generally use for transferring your favorite movies and music, to install Windows 7 to your PC. It’s much faster and reliable than an optical drive. This trick would be more than a solution to the users who have their

Keyboard shortcuts for Windows

Windows system key combinations

• F1: Help
• CTRL+ESC: Open Start menu
• ALT+TAB: Switch between open programs
• ALT+F4: Quit program
• SHIFT+DELETE: Delete item permanently
• Windows Logo+L: Lock the computer (without using CTRL+ALT+DELETE)

Windows program key combinations

• CTRL+C: Copy

An A-Z Index of the Windows CMD command line

   ADDUSERS Add or list users to/from a CSV file
   ADmodcmd Active Directory Bulk Modify
   ARP      Address Resolution Protocol
   ASSOC    Change file extension associations•
   ASSOCIAT One step file association

"The Windows Installer Service Could Not Be Accessed" error message when you install a program in Windows XP

To resolve this issue, follow these steps:

1. Log on to your computer as an administrator.
2. Click Start, and then click Run.
3. In the Open box, type cmd, and then click OK.
4. At the command prompt, typemsiexec.exe /unregister, and then press ENTER.
5. Type msiexec /regserver, and then press ENTER.

Lock folder without any software

Open Notepad and copy the below code and save as locker.bat. At first time start it will create folder with Locker automatically for u. Don't forget to change your password in the code its shown the place where to type your password.
after creation of Locker folder again click on the locker.bat.it will ask.press Y then Locker folder will be disappeared.again to get it click on locker.bat. and give ur password u will get the folder again.

****************************************

******************



cls
@ECHO OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM

How to Lock any Drive ( Hard Disk & CD Drive )

STEPS TO LOCK DRIVE IN WINDOWS:

1. Go to Start menu and then to RUN  and type "gpedit.msc" (without quotes) and Press Enter.

2. Now you will see a new dialog window , where you will see two things "Computer Configuration" and "User Configuration". Now click on "User Configuration".

3. There you will see three items. Now you have to Click on "Administrative Templates". Then go to "Windows Components".

4. There you will see a lot of Windows Components. Now Click on " Windows Explorer". 

5. Now you will find something like this "Prevent Access To Drives From My Computers" , double click on it . It will open its properties. Now to lock a drive or drives click on "Enabled"radio button. Now from the drop down menu select the dri

How To Use System Restore in Windows 7

1. 
   Navigate to the Start -> All Programs -> Accessories -> System Tools program group.
   
2. Click on the System Restore program icon.
   
3. Click Next > on the Restore system files and settings window.
   
4. Choose the restore point that you want to use.
   Note: Check the Show more restore points checkbox to see more than the most recent restore points.
   Note: Any restore points that you created, scheduled restore points that Windows 7 created, and those created automatically during the installation of certain programs will be listed here. You can not use System Restore to undo Windows 7 changes to a date that a restore point does not exist.
   
5. Click Next >.
   

How to change IP address in Windows 7

This short step by step guide will help you learn how to change IP address in your Windows 7 system. By the way, change of ip in Windows 7 is easy. If you don't know what IP parameters to change to, please contact your network administrator.

How to Change or Restore Default Windows 7 Desktop Icons

1. Right click on a empty area of the desktop and click on Personalize. (See screenshot below)

2. Click on the Change desktop icons link at the upper left corner. (See screenshot below)

3. To Change the Icon for a Desktop Icon

A) In the middle pane, select (click on) a desktop icon that you want to change the icon for, and click on the Change Icon button. (See screenshot below)

B) Select a icon that you want to use instead, or click on the Browse button and navigate to the location of the icon you want to use.
NOTE: Any icon of your own you want to use instead needs to be a 256x256 pixel .ico Vista style icon file to properly display at larger view settings.

C) Go to step 5.

4. To Restore the Default Icon for a Desktop Icon

A) In the middle pane, select (click on) a desktop icon that you want to restore the default icon for, and click on the Restore Default button. (See screenshot below)

5. Click on OK to apply. (See screenshot above or below step 3A)

6. Close the Personalization window. (See screenshot below step 2)